Integrated Industrial Solutions for Your Facility
Engineering, fabrication, and turnkey execution of
Clean Rooms, Processing Systems, RO Units, CIP/SIP Systems,
and Sanitary Stainless Steel Equipment.
Free Engineering Consultation
HYGIENIC PROCESS FILTRATION • EGYPT
Sanitary Stainless Steel Filters
Hygienic stainless-steel mesh filters and strainers for pharmaceutical, food, beverage, dairy, cosmetics and process-liquid pipelines.
Available in SS304 or SS316L, DN25–DN100 / 1–4 inches, with 10–200 mesh screens and multiple sanitary connection configurations.
SS304 / SS316L
DN25–DN100
10–200 Mesh
1-Year Warranty
Sanitary Filter Technical Specifications
Select the material, screen and connection around the process line rather than using one standard configuration for every application.
| Specification | Available Range |
|---|---|
| Material | SS304 / SS316L |
| Nominal Size | DN25–DN100 / 1"–4" |
| Mesh Range | 10–200 mesh |
| Connection / Dimensional Standards | 3A / DIN / SMS / ISO |
| Connections | Welded / Clamped / Union / Flange |
| Configurations | Angle / Inline / Y Strainer / Duplex |
| Warranty | 1 Year |
Standards note:
3A, DIN, SMS and ISO are shown as available connection
and dimensional configurations. They are not presented here
as independent product-certification claims.
HYGIENIC PROCESS FILTRATION
Physical Particle Filtration Inside the Process Line
The stainless-steel screen retains unwanted solid particles while the process liquid continues through the pipeline.
Filter location and mesh selection should be coordinated with the actual liquid, solids load, required process flow and the downstream equipment being protected.
TYPICAL PROCESS FUNCTION
Process Liquid → Mesh Screen → Downstream Equipment
Mesh Filter or Cartridge Filter Housing?
Both can be called sanitary filters, but they perform different filtration functions.
Sanitary Mesh Filter / Strainer
Uses a reusable stainless-steel screen selected from the available 10–200 mesh range.
Physical particle retention
Stainless-steel screen
10–200 mesh range
Process-line equipment protection
Cartridge / Membrane Filter Housing
Uses replaceable filter cartridges or membrane elements for different filtration duties.
Different filtration element
Different retention specification
Different housing design
Specify separately if required
Angle, Inline, Y Strainer or Duplex?
Angle Filter
Consider where an angled body geometry suits pipeline routing and screen access.
Inline Filter
Suitable where inlet and outlet alignment supports a straight process route.
Y Strainer
Positions the filtration chamber at an angle to the main process line.
Duplex Filter
Can be evaluated where additional operating or maintenance flexibility is required.
How to Select the Filter Mesh
The finest available screen is not automatically the best choice for every liquid process.
Define what solids need to be retained from the process liquid.
Consider viscosity and how easily the product passes through the screen.
Higher solids loading can increase screen-cleaning frequency.
The filter should support the production duty without unnecessary restriction.
Finer filtration and screen loading can increase resistance.
Select a practical filtration level for the actual operating cycle.
Mesh count alone is not an exact micron specification.
If particle opening is critical, confirm the actual screen opening for the selected mesh construction.
SS304 or SS316L?
Suitable Hygienic Applications
Can be selected where the process fluid, cleaning chemicals and operating conditions are compatible with the material.
Additional Corrosion Resistance
Can be selected where process chemistry or cleaning conditions require additional corrosion resistance.
Final material selection should consider the process liquid,
cleaning chemistry, temperature and corrosion conditions.
Choose the Connection Around the Process Line
Welded
For suitable permanent stainless-steel process-line integration.
Clamped
Useful where quick removal and cleaning access are required.
Union
Available for compatible removable process-piping arrangements.
Flange
Available where surrounding equipment uses compatible flanged connections.
3A
DIN
SMS
ISO
These identify available connection and dimensional configurations. They are not certification claims.
Sanitary Filtration for Hygienic Process Industries
Pharmaceutical Processing
Physical particle filtration in suitable hygienic liquid-process lines.
Biopharmaceutical Process Support
Suitable hygienic liquid-transfer filtration according to process requirements.
Dairy Processing
Removable stainless-steel screen filtration in hygienic liquid lines.
Food & Beverage
Removal of unwanted solids and protection of downstream equipment.
Brewing & Soft Drinks
Inline filtration selected according to the process and screen requirement.
Cosmetics & Personal Care
Sanitary filtration for suitable liquid-processing and transfer systems.
Keep the Screen Accessible for Inspection & Cleaning
Isolate
Follow the facility procedure before opening the filter.
Remove
Access the filtration screen according to the selected configuration.
Inspect
Check for retained solids, blockage or screen damage.
Clean
Clean the screen and accessible product-contact surfaces.
Check Connections
Inspect removable connections and sealing components.
Return to Service
Reassemble the unit correctly before restarting the process line.
The Filter Is Part of the Complete Process Line
Source equipment and product outlet.
Transfer requirement defined by the process.
Physical filtration through the selected stainless-steel screen.
Next production or processing stage.
From Filter Requirement to Process Integration
Requirement Review
Define liquid, filtration objective, material, size and connection.
Configuration Selection
Select mesh, body geometry and process-line interface.
Engineering Coordination
Check position against pumps, valves and surrounding equipment.
Fabrication / Supply
Prepare the approved filter and stainless-steel components.
Installation
Integrate with the process line where installation is included.
Handover & Support
Provide agreed technical information and after-sales assistance.
What to Send for a Sanitary Filter Quotation
Process Fluid
Identify the liquid passing through the filter.
Application
Pharma, food, dairy, beverage, cosmetics or other.
Line Size
Provide DN or inch connection size.
Material
SS304 or SS316L where already specified.
Filtration Requirement
Mesh or target particle-opening requirement.
Connection Type
Welded, clamp, union or flange.
Connection Standard
3A, DIN, SMS or ISO where applicable.
Configuration
Angle, inline, Y strainer or duplex where known.
Process Duty
Provide operating flow information where available.
Cleaning & Site
State cleaning and installation requirements.
NOT SURE WHICH MESH TO USE?
Request Filter Specifications
Send the Process Requirement Instead
ShababTec can review the fluid, filtration objective, line size and connection requirements before final selection.
Sanitary Stainless Steel Filter FAQ
What sizes are available for ShababTec sanitary filters?
The documented filter range covers DN25–DN100, corresponding to nominal line sizes from 1 to 4 inches.
Are SS304 and SS316L filters available?
Yes. ShababTec's documented sanitary filter range includes both SS304 and SS316L material options.
What mesh sizes are available?
The documented stainless-steel screen range is 10–200 mesh. Final mesh should be selected according to the required particle retention and process conditions.
Is mesh the same as micron?
No. Mesh count identifies screen construction, while the actual opening also depends on wire diameter. Where a precise particle opening is required, confirm the actual screen opening.
What connection types are available?
The current ShababTec technical range includes welded, clamped, union and flange connection options.
Which connection standards are available?
The technical information lists 3A, DIN, SMS and ISO connection and dimensional options. Final compatibility should be confirmed against the project pipeline.
Is this a cartridge filter housing?
The product documented on this page is a stainless-steel mesh filter or strainer using a 10–200 mesh screen range. Cartridge and membrane filter housings use a different filtration technology.
What sanitary filter configurations are available?
The technical product information includes angle filters, inline filters, Y strainers and duplex filter configurations.
Can the filter be integrated with CIP/SIP systems?
Where the filter operates inside a CIP or SIP circuit, the cleaning conditions and required equipment configuration should be defined during project engineering. CIP/SIP compatibility should not be assumed without reviewing the selected filter.
What warranty is available?
The current ShababTec sanitary stainless-steel filter information includes a one-year warranty.
SPECIFY THE FILTER AROUND THE PROCESS
Choose the Right Material, Mesh & Pipeline Connection
Share the process fluid, line size, required filtration, stainless-steel grade, connection and installation conditions. ShababTec can review the requirement and prepare the appropriate sanitary filter configuration.