Integrated Industrial Solutions for Your Facility

Engineering, fabrication, and turnkey execution of
Clean Rooms, Processing Systems, RO Units, CIP/SIP Systems, and Sanitary Stainless Steel Equipment.

PHARMACEUTICAL & INDUSTRIAL WATER TREATMENT • EGYPT

Pharmaceutical Purified Water Systems & RO Solutions

Custom water-treatment systems engineered around the feed water, required final water specification, production requirement and facility.

ShababTec can integrate project-specific pretreatment, soft-water treatment, reverse osmosis, UV, dosing, instrumentation, storage and distribution, with optional EDI polishing according to the approved treatment requirement.

Water-quality boundary: The RO stage produces treated water. Suitability for pharmaceutical Purified Water depends on the complete treatment train and approved final water specification.
Custom Manufacturing Pretreatment Available Manual / Auto / PLC / HMI One-Year RO Warranty
1–100 m³ Available RO system range. No hourly or daily basis is assigned here.
Custom Engineered Equipment configuration is developed according to project requirements.
4 Control Options Manual, Automatic, PLC or HMI configurations are available.
1-Year Warranty Confirmed warranty period for the ShababTec RO system.
WATER QUALITY FIRST

Start with the Required Water Specification

Selecting a pharmaceutical water system starts by defining the required water quality and understanding the actual feed water.

Two facilities requesting the same nominal RO system can require different pretreatment, membrane arrangements, polishing, instrumentation, storage or distribution because their source water and final process requirements are different.

ShababTec therefore starts with water analysis and the intended application before defining the treatment train.

START WITH THIS QUESTION What water quality does the process require? Then define the equipment needed to achieve that target.
WATER-TREATMENT ARCHITECTURE

From Feed-Water Conditioning to Treated-Water Distribution

A complete water-treatment project can combine several technologies. The exact sequence is defined according to the water analysis, target specification and process application.

01

Pretreatment

Feed-water conditioning selected according to the source analysis and downstream treatment requirements.

03

Reverse Osmosis

Custom RO units configured according to feed-water analysis, required treated-water quality and production requirement.

04

UV Systems

UV treatment can be integrated where required by the selected process and water-treatment strategy.

05

Dosing Systems

Chemical dosing equipment can be incorporated for conditioning and operational requirements.

06

Sensors & Instrumentation

Monitoring points are selected according to the process and required system-control philosophy.

07

Storage & Distribution

Tanks, piping and distribution arrangements can be coordinated with the wider facility water system.

08

Optional EDI

Chinese-sourced EDI equipment can be supplied and integrated when the target water specification requires additional polishing.

ENGINEERING LOGIC

How ShababTec Defines the Right Water System

01 Feed-Water Source

Identify municipal, well or other source conditions.

02 Water Analysis

Review available chemical and operating water data.

03 Target Water Quality

Define the quality actually required by the production process.

04 Treatment Train

Select pretreatment, RO and any required polishing stages.

05 Control Level

Select Manual, Automatic, PLC or HMI operation.

06 System Integration

Coordinate storage, distribution, piping and instrumentation.

REVERSE OSMOSIS

Custom RO Systems Across a 1–100 m³ Range

ShababTec RO units are manufactured according to project requirements instead of being restricted to one standard configuration.

System Range 1–100 m³

No hourly or daily basis assigned without project specification.

Output Treated Water

Final target quality depends on the complete treatment system.

Configuration Custom Engineered

Defined according to feed water and project requirements.

Pretreatment Available

Selected according to feed-water conditions.

Controls Manual / Auto / PLC / HMI

Control philosophy is selected according to operating needs.

EDI Optional

Chinese-sourced units available for required polishing applications.

Component Brands Customer Request

Subject to technical suitability and availability.

Warranty 1 Year

Confirmed ShababTec RO system warranty.

PRETREATMENT

Protect the Downstream RO Before the Membrane Stage

Pretreatment should be selected from the actual feed-water conditions rather than copied from a standard system.

Water analysis can identify conditions that require hardness management, conditioning, dosing or other treatment before the RO stage.

ShababTec can configure project-specific pretreatment, soft-water treatment, dosing and instrumentation as required by the selected water-treatment train.

Pretreatment goal: Prepare the feed water for the selected downstream treatment and support stable system operation.
POLISHING DECISION

RO or RO + EDI? Start with the Final Water Requirement

EDI should be selected because the required final specification needs an additional polishing stage — not simply because the application is pharmaceutical.

Decision AreaRO-Based SystemRO + Optional EDI
Primary Role Membrane treatment used to produce treated water according to the selected RO configuration. Adds an additional ionic polishing stage after suitable upstream treatment.
When to Select When the approved project water target can be achieved using the selected RO-based treatment train. When the target water specification requires additional polishing beyond the upstream treatment.
Pretreatment Required arrangement depends on feed-water analysis. Pretreatment and upstream RO remain critical to suitable EDI feed conditions.
Complexity Fewer treatment stages. Additional equipment, controls, instrumentation and maintenance.
ShababTec Availability Custom ShababTec RO systems available. Chinese-sourced EDI equipment can be supplied and integrated.

Neither configuration is presented as universally superior. Final selection is based on the required water specification.

CONTROL & AUTOMATION

Manual, Automatic, PLC or HMI Control

The control level can be selected according to the production environment, operator requirements and required automation philosophy.

Manual Operator-led control for suitable project requirements.
Automatic Automated operating sequences according to system design.
PLC Logic-based equipment control and sequencing.
HMI Visual operator interface where included in the selected architecture.

Individual instruments, sensors, alarms and data functions are project-specific and should be listed in the final technical proposal.

WATER-TREATMENT EQUIPMENT

Components That Can Form Part of the System

Not every project requires every component. The final equipment family is defined from the water analysis and approved treatment strategy.

01

Soft Water Systems

Hardness-reduction solutions for applications where feed-water conditions require softening.

Explore Soft Water →
02

RO Units

Custom reverse-osmosis systems configured around feed water, production requirement and target treated-water quality.

Review RO Systems →
05

Sensors & Instrumentation

Monitoring equipment selected around the water-treatment and control requirements.

Review Instrumentation →
STORAGE & DISTRIBUTION

Water Generation Is Only Half of the System

The treated water must continue from generation to storage, distribution and the required points of use through an appropriate project arrangement.

ShababTec can coordinate storage tanks, distribution piping, instrumentation and stainless-steel project components with the wider water-treatment scope.

For hygienic or regulated applications, sanitary piping and orbital welding capability can also be coordinated where required.

APPLICATIONS

Water Treatment for Pharmaceutical & Controlled Production

The same equipment family can serve different industries, but the required water target and treatment configuration change according to the application.

Pharmaceutical Manufacturing

Water-treatment projects where the final system must be configured against the facility's required pharmaceutical water specification.

Cosmetics & Personal Care

Water treatment supporting production of creams, lotions, gels, shampoo, liquid soap and related products.

Food & Beverage

Controlled industrial water-treatment systems for process-support and food/beverage production requirements.

Laboratories & Industry

Custom treatment systems for facilities with project-specific laboratory, utility or production-water requirements.

WHY SHABABTEC

Engineering, Manufacturing & Site Execution in One Scope

ShababTec combines local project execution with custom water-treatment engineering rather than treating the RO skid as an isolated purchase.

Local Manufacturing

Supports project customization and coordination during execution.

Feed-Water-Based Engineering

System configuration begins with source conditions and target water quality.

Flexible Control Levels

Manual, Automatic, PLC and HMI approaches are available.

Component Brand Choice

Brands can follow customer preference subject to suitability and availability.

Stainless-Steel Capability

Tanks, piping and project-specific hygienic components can be coordinated.

Installation & Commissioning

Site integration, testing and commissioning can form part of the project.

PROJECT EXECUTION

From Water Analysis to Commissioning

01

Requirement Study

Review feed-water source, application, utilities, site conditions and required water target.

02

Engineering Design

Define treatment stages, RO architecture, controls, instrumentation and system integration.

03

Manufacturing

Manufacture and assemble approved project equipment according to the selected scope.

04

Installation

Coordinate positioning, connections, piping and facility integration.

05

Testing & Commissioning

Check operation, controls and integration before project handover.

06

After-Sales Support

Continued technical assistance, maintenance guidance and system support after commissioning.

FASTER TECHNICAL QUOTATION

What We Need to Engineer Your Water System

Providing real project data reduces assumptions and helps define the treatment concept and quotation more accurately.

01

Feed-Water Source

Municipal, well or another available source.

02

Water Analysis

Send the latest available feed-water analysis.

03

Required Water Quality

Define the target required by the actual process.

04

Required System Range

State the required project quantity/duty and operating basis.

05

Application

Pharmaceutical, cosmetics, food, laboratory or industrial use.

06

Operating Conditions

Provide available utilities and operating requirements.

07

Installation Space

Share plant-room dimensions or available layout.

08

Control Preference

Manual, Automatic, PLC or HMI.

09

EDI Requirement

State if EDI is requested or allow engineering to assess the need.

10

Preferred Brands

List preferred component brands where applicable.

HAVE A WATER ANALYSIS?

Send the Analysis with Your Required Water Target

ShababTec can review the feed-water conditions, application and project requirement before defining the treatment train.

Send Your Water Analysis
FAQ

Pharmaceutical Purified Water & RO FAQ

What can a complete ShababTec water-treatment system include?

Depending on the project, the system can include pretreatment, soft-water treatment, reverse osmosis, UV, dosing, instrumentation, storage, distribution and optional EDI. The final arrangement depends on feed-water analysis and the required final water specification.

What RO system range does ShababTec provide?

ShababTec currently confirms custom RO systems across an available 1–100 m³ range. No hourly or daily basis is assigned to that figure on this page; the applicable project duty is defined in the individual technical specification.

Does an RO system automatically produce pharmaceutical Purified Water?

No. The RO stage produces treated water. Suitability for pharmaceutical Purified Water depends on the required final specification and the complete treatment, polishing, storage and distribution arrangement selected for the project.

Is pretreatment available?

Yes. ShababTec provides pretreatment selected according to feed-water conditions and the requirements of the downstream system.

Can EDI be integrated after RO?

Yes. Chinese-sourced EDI equipment can be supplied and integrated when the project water specification requires an additional polishing stage.

What control options are available?

Confirmed ShababTec options include Manual, Automatic, PLC and HMI configurations. Instrumentation and detailed control functions are defined for the project.

Can the customer specify preferred component brands?

Yes. Component selection can follow customer preferences subject to technical suitability and availability.

Can ShababTec provide storage and distribution systems?

Storage tanks, distribution arrangements, instrumentation, piping and related stainless-steel components can be coordinated with the water-treatment project according to the required scope.

Does ShababTec provide installation and commissioning?

Yes. Installation, system integration, testing, commissioning and after-sales support can form part of the ShababTec project execution scope.

What warranty is provided?

ShababTec currently confirms a one-year warranty for the RO system.

START WITH THE WATER ANALYSIS

Define the Water Target Before Selecting the Treatment Train

Share your feed-water analysis, required final water quality, production requirement, automation preference and facility information. ShababTec can review the project and define the appropriate water-treatment concept.

Feed-Water Analysis Target Water Quality System Requirement Control Level EDI Requirement Facility Layout